Digital Product 數碼產品 / FUJIFILM / instax SHARE SP-2
instax SHARE SP-2

Create instax prints from your precious memories in your smartphone

Introduction

High-speed printing in 10 seconds

A new laser exposure system achieves a faster printing time of 10 seconds from print data transfer to print output. At the same time, printing noise is lower which makes your printing experience much more enjoyable.

Superb image quality

High definition & high image quality ideal for photos

High resolution with print pixels of 800 x 600 dots and of 320 dpi shows detailed gradations and the face expressions of a full-length portrait, characters, materials, etc. clearly.

Specification

Recording method 3-color exposure with OLED
Film Fujifilm INSTAX mini instant color film (sold separately)
Photo capacity 10 prints / pack
Image size 62mm x 46mm
Supported image size 800 x 600 dots
Printing resolution 320 dpi
Printing levels 256 levels per color (RGB)
Interface Standard compliance IEEE802.11b/g, Operation frequency: 2.4GHz (5GHz is not supported.)
Supported image format JPEG, PNG
Printing time Image Recording - photo output (Feed out) Approx. 10 sec.
Approximate pringting capacity Approx. 100 prints (Based on our test conditions)
*Varies depending on the conditions of use.
Power supply NP-45S(1 piece)
Charging time Approx. 90 minutes (Varies depending on the battery remaining level)
Power consumption 2 W
Operating temperature +5°C to + 40°C / +41°F to + 104°F(no condensation)
Dimensions 89.5mm x 131.8mm x 40mm (excluding projections)
Weight 250g (without battery and film pack)
Supplied accessory USB cable (BOB711)