Amplifier 擴音機 / Audiolab / 8200A
8200A

Integrated Amplifier

Introduction

The 8200A delivers 60W per channel and supplies six line-level inputs and three outputs. Twin sets of speaker terminals are provided to facilitate bi-wiring, along with a high-quality, front-mounted headphone output, while a top-grade ALPS motorised volume control and motorised input switches deliver the convenience of remote control without any loss of performance.

Specification

Frequency Response: CD, TUNER, AUX, VIDEO, TAPE1, TAPE2 and POWEP AMP:

20Hz-20kHz±0.5Db; 1Hz-65kHz-3dB

Total Harmonic Distortion & Noise: Less than 0.07%
Channel Balance: Within 1dB
Channel Separation: Better than 60dB@1 kHz any input
Crosstalk: Better than 80dB@1 kHz
Polarity (phase): Non-inverting for all inputs and outputs
Pre-amp Output: PRE OUT 1and PRE OUT 2: Output Impedance l00Ω

Maximum Output>7.3V RMS

Headphone Output: Output impedance: 330Ω(Suitable for headphones 8Ω-2kΩ impedance)
Record Output: VIDEO OUT,TAPE 1 OUT, TAPE2 OUT:

Output impedance: 1kΩ

Gain from input to record output 0dB(x1)

Muting: Muting controlled manually or automatically
Operating Temperature Range: 10-35℃
Power Requirements (Depending on Region): 50-60Hz 100V, 110-120V and 220-230V models available

Maximum Power Consumption: 440VA

Dimensions (WXHXD): 445x74x335 mm - including feet, terminals and controls

445x64x302 mm - excluding feet, terminals and controls

Weight: Net: 7.4kg; Shipping: 8.8kg

Feature

•Magnetic Flux Isolation
•ALPS motorized volume control
•Aluminum panel construction
•Four stage discrete power amplifier
•Open loop gain calibration
•J-FET input stages
•Gold plated relay switching
•4 Operating modes
•Integrated
•Pre-Power
•Pre
•Pre-Power AV